1. Home
  2. MaxCloud
  3. Registering A Panasonic KX-TPA60 using SRTP/TLS.

Registering A Panasonic KX-TPA60 using SRTP/TLS.

User Guide

  1. Add the following attributes to the OrgUnit for each extension. Apply to only the phones to support SRTP/TLS. Avoid setting this up in PBX level because it will impact entire PBX.
  1. Register the phone to Aarenet from Panasonic phone’s web configuration page.
    • From Aarenet’s extension page, click New Phone.
    • From the phone’s web config page > VoIP tab. From the left side panel select -Line 1 under SIP Settings. Fill out the extension information as shown below and save the changes.
  • From the left side panel select -Line 1 under VoIP Settings. Fill out the VoIP information as shown below and save the changes.

Limitations

  • DND is not synced to AS7.

Example: Enable DND on the phone. If a call comes in while UC client is also logged in, the phone will not ring but UC client will still ring.

  • Forward all is not synced to AS7.

Example: Enable forward all to another extension on the phone. If a call comes in while UC client is also logged in, the forward target extension will ring, but UC client will also ring.

Updated on 8 August 2023

Was this article helpful?

Related Articles

Need Support?
Can't find the answer you're looking for?
Contact Support